Enable Log Display - Extreme Networks ExtremeWare Command Reference Manual

enable log display

enable log display
enable log display
Description
Enables a running real-time display of log messages on the console display.
Syntax Description
This command has no arguments or variables.
Default
Disabled
Usage Guidelines
If you enable the log display on a terminal connected to the console port, your settings will remain in
effect even after your console session is ended (unless you explicitly disable the log display).
You configure the messages displayed in the log using the , or
configure log display configure log
commands.
target console-display
In ExtremeWare 7.1.0, the ability to control logging to different targets was introduced. The new
command equivalent to is the following:
enable log display
enable log target console-display
To change the log filter association, severity threshold, or match expression for messages sent to the
console display, use the command
configure log target console-display
Example
The following command enables a real-time display of log messages:
enable log display
History
This command was first available in ExtremeWare 2.0.
This command was added to the Summit "e" series of switches in ExtremeWare 7.1e.
Platform Availability
This command is available on all platforms.
ExtremeWare 7.5 Command Reference Guide 753