Show Flowstats - Extreme Networks ExtremeWare Command Reference Manual

Commands for Status Monitoring and Statistics

show flowstats

show flowstats
Description
Displays status information for the flow statistics function.
NOTE
This command is available only on the "i" series switches.
Syntax Description
N/A
Default
Displays summary statistics information for all ports.
Usage Guidelines
The command with no arguments displays flowstats configuration information for all ports. The
information is displayed in a format similar to the flowstats command syntax. The following
information is displayed:
• Whether the flowstats feature is enabled or disabled
• Whether flowstats is enabled or disabled for individual ports
• The configuration of flow-collector devices (
• NetFlow Timeout configurations
• Whether NetFlow Filters are enable or disabled
• NetFlow filter specifications
• NetFlow ping-check configuration
Example
The command with no options, for a switch with NetFlow statistics enabled on ports
show flowstats
1, 40, and 43, displays output similar to the following:
Summit48i: show flowstats
Flowstats enabled
Port Filter
--------------------------------------------------------------------------------------
-------
1 1 IP
DestIP: 10.203.0.1/255.255.255.255
SrcIP: any
40 8
770
NetFlow Server Config
proto timeout group
5 3
- 5
)
OverflowPkts
N/A
DestPort: any
SrcPort: any
1 N/A
flags
EIA
EIA
ExtremeWare 7.5 Command Reference Guide