Extreme Networks ExtremeWare Command Reference Manual page 936

Hide thumbs Also See for ExtremeWare:

Table of Contents

Security Commands

The following command defines a default entry that is used to specify an explicit deny:

create access-list denyall ip dest 0.0.0.0/0 source 0.0.0.0/0 deny ports any

This command was first available in ExtremeWare 6.0, and replaced the

configure ipqos

Platform Availability

This command is available on the "i" series platforms only.

ExtremeWare 7.5 Command Reference Guide

Extremeware 7.5