Unconfigure Wireless Ports Image-Configuration - Extreme Networks ExtremeWare Command Reference Manual

unconfigure wireless ports image-configuration

unconfigure wireless ports <portlist |all> img-configuration [bootstrap }
bootloader | runtime | all]
Description
This command unconfigures the image configuration for the specified wireless port or ports.
Syntax Description
portlist
all
bootstrap
bootloader
runtime
all
Usage Guidelines
Use this command to unconfigure one or all image files for the specified wireless port or ports.
You cannot unconfigure the runtime configuration of a wireless port that is enabled. You must disable
the port first.
Examples
The following command unconfigures the bootloader image for port 1:18 on the Summit 300-48:
unconfigure wireless ports 1:18 img-configuration bootloader
History
This command was introduced in ExtremeWare 7.5.
Platform Availability
This command is available on the Summit 300-48, Summit 300-24, Summit 400-24p and Alpine switches.
ExtremeWare 7.5 Command Reference Guide
Specifies one or more ports or slots and ports. an be one or more port numbers. May be
in the form 1, 2, 1:2, 3-5.
Specifies all ports.
Specifies the bootstrap image file.
Specifies the bootloader image file.
Specifies the runtime image file.
Specifies all image files.
unconfigure wireless ports image-configuration
1117