Configure Slb Global Nntp - Extreme Networks ExtremeWare Command Reference Manual

SLB Commands—"i" Series Switches Only

configure slb global nntp

configure slb global nntp <newsgroup>
Description
Configures the default parameters for layer 7 NNTP service checking.
Syntax Description
newsgroup Specifies a newsgroup.
Default
The default newsgroup is ebusiness.
Usage Guidelines
The NNTP service check provides a more thorough check than ping check, because the NNTP service
check logs in to the service.
To enable service checking, use the following command:
enable slb vip service-check
To configure the frequency and timeout of service checks, use the following command:
configure slb global service-check
To configure the parameters for a specific virtual server, use the following command:
configure slb vip service-check ftp
Example
The following command configures the service check to log into the newsgroup
"comp.dcom.lans.ethernet":
configure slb global nntp comp.dcom.lans.ethernet
History
This command was first available in ExtremeWare 6.1.
Platform Availability
This command is available on all "i" series platforms.
518 ExtremeWare 7.5 Command Reference Guide