Configure Security-Profile Wpa-Psk - Extreme Networks ExtremeWare Command Reference Manual

configure security-profile wpa-psk

configure security-profile <name> wpa-psk [hex <hexadecimal_digit> |
passphrase <alphanumeric_string>]
Description
Configures the WPA pre-shared key to have the specified hexadecimal or alphanumeric value.
Syntax Description
name
hex
hexadecimal digit
alphanumeric_string
Default
N/A
Usage Guidelines
Use this command to configure the WPA pre-shared key using a hexadecimal (64 bytes) digit or ASCII
alphanumeric string (8 to 63 characters long).
Examples
The following example configures the WPA pre-shared key "abcdefgh" for the security profile sec_prof1:
configure security-profile sec_prof1 wpa-psk passphrase abcdefgh
History
This command was first available in ExtremeWare 6.2a and added to the "e" series in 7.3e and to the "i"
series in 7.3.0.
Platform Availability
This command is available on the Summit 300-48, Summit 300-24, Summit 400-24p, and Alpine 3800
switches.
ExtremeWare 7.5 Command Reference Guide
Specifies the names of the security profile.
Specifies the WPA pre-shared key type as hexadecimal.
Specifies a 64-byte hexadecimal key.
Specifies a passphrase name in ASCII alphanumeric notation (8-63 characters long)
configure security-profile wpa-psk
905