Show Odometer - Extreme Networks ExtremeWare Command Reference Manual

Commands for Managing the Switch

show odometer

show odometer
Description
Displays a counter for each component of a switch that shows how long it has been functioning since it
was manufactured.
Syntax Description
This command has no arguments or variables.
Default
N/A.
Usage Guidelines
The output from this command displays how long each individual component in the whole switch has
been functioning since it is manufactured. This odometer counter will be kept in the EEPROM of each
monitored component. This means that even when the component is plugged into different chassis, the
odometer counter will be available in the new switch chassis. The following components are monitored
by the odometer:
• For the Black Diamond—MSM and I/O modules
• For the Alpine—SMM, I/O slots, and power supplies
• For stackable switches—the CPU
Example
The following command displays how long each component of a switch has been functioning since it's
manufacture date:
show odometer
The following is the output from this command from an "e" series switch:
* Summit300-24:13 # show odometer
Unit
------------------------------ ---------- --------------
Mainboard:
The following is the output from this command from an "i" series switch:
* Alpine3804:4 # show odometers
Field Replaceable Units
------------------------------ ---------- --------------
Backplane:
SMM:
Slot 1: Empty
218
Service First Recorded
Days Start Date
22 Jan-17-2065
Service First Recorded
Days Start Date
145 Jan-22-2003
145 Jan-22-2003
ExtremeWare 7.5 Command Reference Guide