Extreme Networks ExtremeWare Command Reference Manual page 650

SLB Commands—"i" Series Switches Only
ratio_vip 4.1.1.100
rr_vip 10.1.1.10
Modes: TP - Transparent,
Automatically Exported via: PA - Proxy Arp, HR - Host Route, SR - Subnet Route
Flags: E - Enable, U - Up,
P - Persistence,
! - VLAN has not been configured with "slb-type"
History
This command was first available in ExtremeWare 6.1.
Platform Availability
This command is available on all "i" series platforms.
650
80 1
80 1
TL - Translational,
A - Active Unit,
S - Sticky, R - SvcDown-Reset,
TL SR EUA-----ratio_po0/3
TP PA EUA----!rr_pool0/3
PT - Port Translational
H - Health-Check Enabled,
ExtremeWare 7.5 Command Reference Guide