Security Commands
configure cpu-dos-protect filter-precedence
configure cpu-dos-protect filter-precedence <number>
Description
Configures the access list precedence for denial of service protection. If you set the filter-precedence to
0, the ACLs created by DoS protection will be overwritten by the default VLAN QoS profile.
Syntax Description
filter-precedence
Configures the access list precedence.
Default
The default is 10.
Usage Guidelines
When heavy traffic reaches the alert threshold, a hardware ACL is created that blocks the traffic for the
timeout number of seconds.
Example
The following command configures filter-precedence of 5:
configure cpu-dos-protect filter-precedence 5
History
This command was first available in ExtremeWare 6.2.2.
The filter-type-allowed keyword was added in ExtremeWare 7.0.0.
This command was added to the Summit "e" series of switches in ExtremeWare 7.3e.
Platform Availability
This command is available on all platforms.
848
ExtremeWare 7.5 Command Reference Guide