Configure Slb Node Ping-Check - Extreme Networks ExtremeWare Command Reference Manual

configure slb node ping-check

configure slb node <ip address> ping-check frequency <seconds> timeout
<seconds>
Description
Overrides the global default frequency and timeout values for this node.
Syntax Description
ip address
frequency
timeout
Default
The default frequency is 10 seconds.
The default timeout is 30 seconds.
Usage Guidelines
The frequency must be less than the timeout.
To set the global ping-check frequency and timeout, use the following command:
configure slb global ping-check
Example
The following command sets the ping-check for the node with an IP address of 10.2.1.2 to a frequency
of 30 seconds and a timeout of 90 seconds:
configure slb node 10.2.1.2 ping-check frequency 30 timeout 90
History
This command was first available in ExtremeWare 6.1.
Platform Availability
This command is available on all "i" series platforms.
ExtremeWare 7.5 Command Reference Guide
Specifies the IP address of the node.
Specifies the frequency of the ping check. The range is 1 to 60 seconds.
Specifies the timeout of the ping check. The range is 1 to 60 seconds.
configure slb node ping-check
549