Configure Enhanced-Dos-Protect Ipfdb Learn-Window - Extreme Networks ExtremeWare Command Reference Manual

configure enhanced-dos-protect ipfdb learn-window

configure enhanced-dos-protect ipfdb learn-window <learn-window> ports
<portlist>
Description
Configures the learning window on untrusted ports for the enhanced denial of service protection IPFDB
learning qualifier.
Syntax Description
learn-window
portlist
Default
The default learning window is 10 seconds.
Usage Guidelines
Use this command to change the learning window values for selected untrusted ports. To verify
configuration, use the following command:
show enhanced-dos-protect ipfdb ports <portlist>
Example
The following command configures the learn window on port 2 at 80 seconds:
configure enhanced-dos-protect ipfdb learn-window 80 ports 2
History
This command was first available in ExtremeWare 7.3.0 and ExtremeWare 7.3e.
Platform Availability
This command is available on all platforms.
ExtremeWare 7.5 Command Reference Guide
Specifies the number of seconds for the learning window per port. This value is the duration
of time to be considered to reach the threshold. The valid range is 5-300 seconds. The
default value is 10 seconds.
Specifies one or more ports or slots and ports. On a modular switch, can be a list of slots and
ports. On a stand-alone switch, can be one or more port numbers. May be in the form 1, 2,
3-5, 1:*, 1:5, 1:6-1:8.
configure enhanced-dos-protect ipfdb learn-window
859