Configure Slb Global Persistence-Level - Extreme Networks ExtremeWare Command Reference Manual

configure slb global persistence-level

configure slb global persistence-level [any-vip | same-vip-any-port |
same-vip-same-port]
Description
Configures the persistence level globally.
Syntax Description
any-vip
same-vip-any-port
same-vip-same-port
Default
The default level is
Usage Guidelines
Use this command when different virtual servers do not require different persistence settings.
If you configure
Example
The following command sets the global persistence level to
configure slb global persistence-level any-vip
History
This command was first available in ExtremeWare 6.1.
Platform Availability
This command is available on all "i" series platforms.
ExtremeWare 7.5 Command Reference Guide
Specifies that an entry can match any port on any virtual server.
Specifies that an entry must match the virtual server and can be any port.
Specifies that an entry must match both virtual server and port for persistence.
.
same-vip-same-port
persistence, ensure that all virtual servers in all pools have the same services.
any-vip
configure slb global persistence-level
:
any-vip
519