Enable Smartredundancy - Extreme Networks ExtremeWare Command Reference Manual

Commands for Configuring Slots and Ports on a Switch

enable smartredundancy

enable smartredundancy <portlist>
Description
Enables the Smart Redundancy feature on the redundant Gigabit Ethernet port.
Syntax Description
portlist Specifies one or more ports or slots and ports. On a modular switch, can be a list of slots and ports.
On a stand-alone switch, can be one or more port numbers. May be in the form 1, 2, 3-5, 2:*, 2:5,
2:6-2:8.
Default
Enabled
Usage Guidelines
When the Smart Redundancy feature is enabled, the switch always uses the primary link when the
primary link is available.
On a modular switch,
<portlist>
can be one or more port numbers. For a detailed explanation of port specification, see "Modular Switch
Numerical Ranges" or "Stand-alone Switch Numerical Ranges" in Chapter 1.
Example
The following command enables the Smart Redundancy feature on port 4 on a switch:
enable smartredundancy 4
The following command enables the Smart Redundancy feature on slot 1, port 4 on a BlackDiamond
switch:
enable smartredundancy 1:4
History
This command was first available in ExtremeWare 2.0.
Support for modular switches was first available in ExtremeWare 4.0.
This command was added to the Summit "e" series of switches in ExtremeWare 7.3e.
Platform Availability
This command is available on all platforms.
316
can be a list of slots and ports. On a stand-alone switch,
<portlist>
ExtremeWare 7.5 Command Reference Guide