Extreme Networks ExtremeWare Command Reference Manual page 284

Commands for Configuring Slots and Ports on a Switch
• IPX packets—Uses the source and destination MAC address and IPX identifiers.
• All other packets—Uses the source and destination MAC address.
To verify your configuration, use the command. The show sharing
show sharing address-based
address-based output displays the addressed-based configurations on the switch.
Example
The following examples configures the switch to examine the MAC source and destination address.
On the "i" series of switches:
configure sharing address-based l2
On the "e" series of switches:
configure sharing address-based mac-source-dest
History
This command was first available in ExtremeWare 6.2.
This command was added to the Summit "e" series of switches in ExtremeWare 7.1e.
Platform Availability
This command is available on all platforms.
284 ExtremeWare 7.5 Command Reference Guide