Unconfigure Fdb-Scan Period - Extreme Networks ExtremeWare Command Reference Manual

FDB Commands

unconfigure fdb-scan period

unconfigure fdb-scan period
Description
Returns the FDB scan interval to the factory default of 30 seconds.
Syntax Description
This command has no arguments or variables.
Default
N/A
Usage Guidelines
This setting is independent of and does not affect the system health check configurations.
Example
The following command returns the FDB scan interval to 30 seconds:
unconfigure fdb-scan period
History
This command was first available in ExtremeWare 6.2.2b108.
This command was not supported in ExtremeWare 7.0.
This command is supported in ExtremeWare 7.1.0.
Platform Availability
This command is available on the "i" series platform only.
428 ExtremeWare 7.5 Command Reference Guide