Disable Edp Ports - Extreme Networks ExtremeWare Command Reference Manual

disable edp ports

disable edp ports [<portlist> | all]
Description
Disables the Extreme Discovery Protocol (EDP) on one or more ports.
Syntax Description
portlist Specifies one or more ports or slots and ports. On a modular switch, can be a list of slots and ports.
On a stand-alone switch, can be one or more port numbers. May be in the form 1, 2, 3-5, 2:*, 2:5,
2:6-2:8.
all Specifies all ports on the switch. See "Usage Guidelines" for more information.
Default
Enabled
Usage Guidelines
On a modular switch,
can be one or more port numbers. For a detailed explanation of port specification, see "Modular Switch
Numerical Ranges" or "Stand-alone Switch Numerical Ranges" in Chapter 1.
You can use the
longer need to locate neighbor Extreme Networks switches.
For version 6.1:
• The parameter specifies all ports on the switch.
all
For Version 6.0 and later:
• SummitLink is not supported.
For version 2.0 and 4.0:
• EDP cannot be disabled on a port that has SummitLink enabled, nor on ports that are connected to a
Summit Virtual Chassis.
Example
The following command disables EDP on port 4 and port 6 on a stand-alone switch:
disable edp ports 4,6
The following command disables EDP on slot 1, ports 2 and 4 on a modular switch:
disable edp ports 1:2, 1:4
ExtremeWare 7.5 Command Reference Guide
can be a list of slots and ports. On a stand-alone switch,
<portlist>
command to disable EDP on one or more ports when you no
disable edp ports
disable edp ports
<portlist>
289