Show Snmpv3 Extreme-Target-Addr-Ext - Extreme Networks ExtremeWare Command Reference Manual

show snmpv3 extreme-target-addr-ext

show snmpv3 extreme-target-addr-ext {hex <hex value>} <addr name>
Description
Display information about SNMPv3 target addresses enhanced or standard mode.
Syntax Description
hex
addr name
Default
N/A.
Usage Guidelines
Use this command to display entries in the SNMPv3 extremeTargetAddressExtTable.
Example
The following command displays the entry for the target address named v1v2cNotifyTAddr1:
show snmpv3 extreme-target-addr-ext v1v2cNotifyTADDr1
The output of the command is similar to:
Target Addr Name : v1v2cNotifyTAddr1
Mode
IgnoreMPModel
UseEventComm
History
This command was first available in ExtremeWare 7.1.0.
This command was added to the Summit "e" series of switches in ExtremeWare 7.2e.
Platform Availability
This command is available on all platforms.
ExtremeWare 7.5 Command Reference Guide
Specifies that the value to follow is to be supplied as a colon separated string
of hex octets.
Specifies a string identifier for the target address.
: Enhanced
: Yes
: Yes
show snmpv3 extreme-target-addr-ext
229