Extreme Networks ExtremeWare Command Reference Manual page 337

Ld Share Type: (a) address based, (dy) dynamic
The following command displays the port loadsharing group configured for port 5:4; the current master
has shifted to port 7:4 since both ports 5:4 and 5:5 of the group are not active links:
show ports 5:4 sharing
The following is the output from this command:
* admin:3 # sh port 5:4 sharing
Load Sharing Monitor
Config Current
Master Master
==========================================================
5:4 7:4
Link Status: (A) Active, (D) Disabled, (ND) Not Distributing
Ld Share Type: (a) address based, (p) port based, (r) round robin
History
This command was first available in ExtremeWare 6.2.2.
This command was modified in ExtremeWare 7.0.0 to support the
This command was added to the Summit "e" series of switches in ExtremeWare 7.2e.
Platform Availability
This command is available on all platforms.
ExtremeWare 7.5 Command Reference Guide
Ld Share Ld Share
Type Group
r 5:4
r 5:5
r 7:4
r 7:5
(NP) Not Present, (R) Ready
(dy) dynamic
Link Link
Status Ups
NP 1
NP 1
A 2
A 1
algorithm.
dynamic
show ports sharing
337