Configure Flow-Redirect Service-Check Pop3 - Extreme Networks ExtremeWare Command Reference Manual

configure flow-redirect service-check pop3

configure flow-redirect <flow redirect> service-check pop3 user <user name>
<password>
Description
Configures the flow redirection POP3 check.
Syntax Description
flow redirect
user name
password
Default
N/A
Usage Guidelines
This command automatically enables POP3 check. The POP3 check logs in to each next hop specified in
the flow redirection policy with the user name and password specified.
For ExtremeWare 6.2.0 and prior, the frequency of the POP3 check is 60 seconds, the timeout of the
POP3 check is 180 seconds, and you cannot configure these times.
For ExtremeWare 6.2.1 and later, configure the frequency and timeout using the following command:
configure flow-redirect timer service-check
Example
The following command configures (and enables) POP3 check for the flow redirection policy named
"pop3_flow" and logs in with the user name "test" and the password "extreme":
configure flow-redirect pop3_flow service-check pop3 user test extreme
History
This command was first available in ExtremeWare 6.1.5.
Platform Availability
This command is available on all "i" series platforms.
ExtremeWare 7.5 Command Reference Guide
Specifies a flow redirection policy.
Specifies the user name for logging in to the POP3 service.
Specifies the password for logging in to the POP3 service.
configure flow-redirect service-check pop3
501