Show Snmpv3 Filter-Profile - Extreme Networks ExtremeWare Command Reference Manual

show snmpv3 filter-profile

show snmpv3 filter-profile {{hex <hex value>} <profile name>} {param {hex
<hex value>} <param name>}
Description
Display the association between parameter names and filter profiles.
Syntax Description
hex
profile name
param name
Default
N/A.
Usage Guidelines
Use this command to display the snmpNotifyFilterProfileTable. This table associates a filter profile with
a parameter name. The parameter name is associated with target addresses, and the filter profile is
associated with a series of filters, so, in effect, you are associating a series of filters with a target address.
Example
Use the following command to display the entry with filter profile fpro1 with the parameter name
param1:
show snmpv3 filter-profile fpro-1 param param1
Output from the command is similar to:
Filter Profile Params Name : param1
Name
Storage Type
Row Status
History
This command was first available in ExtremeWare 7.1.0.
This command was added to the Summit "e" series of switches in ExtremeWare 7.2e.
Platform Availability
This command is available on all platforms.
ExtremeWare 7.5 Command Reference Guide
Specifies that the value to follow is to be supplied as a colon separated string
of hex octets.
Specifies the filter profile name.
Specifies the parameter name.
: fpro-1
: NonVolatile
: Active
show snmpv3 filter-profile
231