Extreme Networks ExtremeWare Command Reference Manual page 834

Security Commands
Examples
The following command adds an IP subnet address to access profile nosales, as the next available entry:
configure access-profile nosales add ipaddress 10.1.33.0/24
The following command configures the access profile AS1 to permit AS paths beginning with AS
number 1, followed by any AS number from 2 - 8, and ending with either AS number 11, 13, or 15:
configure access-profile AS1 add 15 permit as-path "^1 2-8 [11 13 15]$"
History
A limited version of this command was first available in ExtremeWare 4.0.
This form of the command was available in ExtremeWare 6.1. Support for IPX NetID and IPX SAP
matching was first available in ExtremeWare 6.2.
This command was added to the Summit "e" series of switches in ExtremeWare 7.1e.
This command was modified in ExtremeWare 7.2e to support for the and
AS-path, ipxnet ipxsap
options.
Platform Availability
This command is available on all platforms.
834 ExtremeWare 7.5 Command Reference Guide