SLB Commands—"i" Series Switches Only
configure slb pool lb-method
configure slb pool <pool name> lb-method [least-connections | priority |
ratio | round-robin]
Description
Configures the SLB load balancing method.
Syntax Description
pool name
Specifies a pool.
least-connections
Specifies the least connections load balancing method.
priority
Specifies the priority load balancing method.
ratio
Specifies the ratio load balancing method.
round-robin
Specifies the round-robin load balancing method.
Default
N/A
Usage Guidelines
Use this command to change the load balancing method after you have already created a pool.
To set the ratio or priority of a node, use the following command:
configure slb pool member
Example
The following command changes the load balancing method for the pool "ftp" to ratio:
configure slb pool ftp lb-method ratio
History
This command was first available in ExtremeWare 6.1.
Platform Availability
This command is available on all "i" series platforms.
556
ExtremeWare 7.5 Command Reference Guide