Enable Slb Vip Svcdown-Reset - Extreme Networks ExtremeWare Command Reference Manual

SLB Commands—"i" Series Switches Only

enable slb vip svcdown-reset

enable slb vip [all | <vip name>] svcdown-reset
Description
Enables svcdown-reset.
Syntax Description
all Specifies all virtual servers.
vip name Specifies a virtual server.
Default
The svcdown-reset feature is disabled by default.
Usage Guidelines
The svcdown-reset feature configures the switch to send TCP RST packets to both the clients and the
virtual server if the virtual server fails a health-check.
To disable svcdown-reset, use the following command:
disable slb vip svcdown-reset
Example
The following command enables svcdown-reset for the virtual server named ftp_vip:
enable slb vip ftp_vip svcdown-reset
History
This command was first available in ExtremeWare 6.1.
Platform Availability
This command is available on all "i" series platforms.
630 ExtremeWare 7.5 Command Reference Guide