Unconfigure Enhanced-Dos-Protect Ipfdb Agingtime - Extreme Networks ExtremeWare Command Reference Manual

Security Commands

unconfigure enhanced-dos-protect ipfdb agingtime

unconfigure enhanced-dos-protect ipfdb agingtime ports <portlist>
Description
Resets aging time configuration for enhanced denial of service protection to default values for the
selected ports.
Syntax Description
portlist Specifies one or more ports or slots and ports. On a modular switch, can be a list of slots and ports.
On a stand-alone switch, can be one or more port numbers. May be in the form 1, 2, 3-5, 2:*, 2:5,
2:6-2:8.
Default
The default aging time is 30 seconds.
Usage Guidelines
Use this command to reset aging time to default values for selected untrusted ports. To verify
configuration, use the
show enhanced-dos-protect ipfdb ports <portlist>
data in the Aging column.
Example
The following command resets the aging time on port 2 to the default value, 30 seconds:
unconfigure enhanced-dos-protect ipfdb agingtime ports 2
History
This command was first available in ExtremeWare 7.3.0.
This command was added to the Summit "e" series of switches in ExtremeWare 7.3e.
Platform Availability
This command is available on all platforms.
1072
command and view
ExtremeWare 7.5 Command Reference Guide