SLB Commands—"i" Series Switches Only
enable slb vip service-check
enable slb vip [all | <vip name>] service-check
Description
Enables layer 7 service check.
Syntax Description
all
Specifies all virtual servers.
vip name
Specifies a virtual server.
Default
Service check is disabled by default.
Usage Guidelines
The service checks are based on the following information:
• If a service check is already configured, it will use the configured service-checking information.
• If a service check is configured for a TCP port number (instead of for a service), ExtremeWare
assigns the service based on the port number (if the port number is well known) and uses the global
default parameters.
To disable service check, use the following command:
disable slb vip service-check
Example
The following command enables service-check for the virtual server "ftp_vip":
enable slb vip ftp_vip service-check
History
This command was first available in ExtremeWare 6.1.
Platform Availability
This command is available on all "i" series platforms.
628
ExtremeWare 7.5 Command Reference Guide