Configure Cpu-Dos-Protect Filter-Type-Allowed - Extreme Networks ExtremeWare Command Reference Manual

configure cpu-dos-protect filter-type-allowed

configure cpu-dos-protect filter-type-allowed <destination | source>]
Description
Configures the type of access list allowed for denial of service protection.
Syntax Description
destination
source
Default
The default is destination.
Usage Guidelines
When heavy traffic reaches the alert threshold, a hardware ACL is created that blocks the traffic for the
timeout number of seconds.
Example
The following command specifies that source ACLs can be created:
configure cpu-dos-protect filter-type-allowed source
History
This command was first available in ExtremeWare 6.2.2.
The filter-type-allowed keyword was added in ExtremeWare 7.0.0.
This command was added to the Summit "e" series of switches in ExtremeWare 7.3e.
Platform Availability
This command is available on all platforms.
ExtremeWare 7.5 Command Reference Guide
Specifies that destination ACLs can be created.
Specifies that source ACLs can be created.
configure cpu-dos-protect filter-type-allowed
849