Save Log - Extreme Networks ExtremeWare Command Reference Manual

Commands for Status Monitoring and Statistics

save log

save log file ascii <local-filespec> {messages [memory-buffer | nvram]}
{severity <severity> {only}} {starting [date <date> time <time> | date
<date> | time <time>]} {ending [date <date> time <time> | date <date> |
time <time>]} {match <match-expression>} {format <format>} {chronological}
Description
Saves the current log messages to the local file system.
Syntax Description
local-filespec Specifies the local file name for storing the log.
messages Specifies the location from which to display the log messages.
memory-buffer Show messages stored in volatile memory.
nvram Show messages stored in NVRAM
severity Specifies the minimum severity level to display (if the keyword only is omitted).
only Specifies that only the specified severity level is to be displayed
starting Show messages with timestamps equal to or greater than that specified
date Specifies the date, where date is <month (1-12)> / <day> {/ <year (yyyy)>}.
time Specifies the time, where time is <hour (0-23)> {: <minute (0-59)> {: <seconds> {.
<hundredths>}}}
match-expression Specifies a regular expression. Only messages that match the regular expression will be
displayed.
format Specifies a format to use to override the format configured for the memory buffer.
chronological Specifies uploading log messages in ascending chronological order (oldest to newest).
Default
The following defaults apply:
• messages—memory buffer
• severity—informational severity messages and higher
• starting, ending—if not specified, no timestamp restriction
• match—no restriction
• format—the format configured with the
• chronological—if not specified, show messages in order from newest to oldest
Usage Guidelines
This command is similar to the
command line, this command saves the log to a local file. For more details on most of the options of this
768
configure log target format
command, but instead of displaying the log contents on the
show log
command
ExtremeWare 7.5 Command Reference Guide