Enable Sflow Ports - Extreme Networks ExtremeWare Command Reference Manual

Commands for Status Monitoring and Statistics

enable sflow ports

enable sflow ports <portlist>
Description
Enables sFlow statistical packet sampling on one or more ports.
NOTE
This command is available only on the "i" series switches.
Syntax Description
portlist Specifies a list of ports or slots and ports. May be in the form 1, 2, 3-5, 2:5, 2:6-2:8.
Default
Disabled
Usage Guidelines
This command enables sFlow on a particular list of ports. You will also need to enable sFlow globally in
order to gather statistics and send the data to the collector. Traffic is sampled on enabled ports only.
Once sFlow is enabled globally, and on the ports of interest, sampling and polling will begin.
Use the following command to enable sFlow globally:
enable sflow
Example
The following command enables sFlow sampling on the port 3:1:
enable sflow portlist 3:1
History
This command was first available in ExtremeWare 7.3.0.
Platform Availability
This command is available on "i" series platforms.
760 ExtremeWare 7.5 Command Reference Guide