Show Snmpv3 Access - Extreme Networks ExtremeWare Command Reference Manual

Commands for Managing the Switch

show snmpv3 access

show snmpv3 access {hex <hex value>} | <group name>}
Description
Displays SNMPv3 access rights.
Syntax Description
hex
group name
Default
N/A.
Usage Guidelines
The
show snmpv3 access
group name, the command will display details for all the groups.
This command displays the SNMPv3 VACMAccessTable entries.
Example
The following command displays all the access details.·
show snmpv3 access
Output from the command is similar to:
Group Name : admin
Context Prefix :
Security Model : USM
Security Level : Authentication Privacy
Context Match : Exact
Read View : defaultAdminView
Write View : defaultAdminView
Notify View : defaultNotifyView
Storage Type : Permanent
Row Status : Active
Group Name : initial
Context Prefix :
Security Model : USM
Security Level : No-Authentication No-Privacy
Context Match : Exact
Read View : defaultUserView
Write View :
Notify View : defaultNotifyView
Storage Type : Permanent
222
Specifies that the value to follow is to be supplied as a colon separated string
of hex octets.
Specifies the name of the group to display.
command displays the access rights of a group. If you do not specify a
ExtremeWare 7.5 Command Reference Guide