Scp2 - Extreme Networks ExtremeWare Command Reference Manual

scp2

scp2 {cipher [3des | blowfish]} {port <portnum>} {debug <debug_level>}
<user>@ [<hostname> | <ipaddress>] :<remote_file> [configuration
{incremental} | image [primary | secondary] | bootrom]
Description
Initiates an SCP2 client session to a remote SCP2 server and copies a file from the remote system to the
switch.
Syntax Description
3des
blowfish
portnum
debug_level
user
host
ipaddress
remote file
configuration
incremental
image
primary
secondary
bootrom
Default
N/A
Usage Guidelines
You must be running a security-enabled version of ExtremeWare 6.2.1 or later (which is under Export
Control) in order to use the SCP2 command.
SSH2 does not need to be enabled on the switch in order to use this command.
This command logs into the remote host as
prompted for a password from the remote host, if required.
ExtremeWare 7.5 Command Reference Guide
Specifies that the 3des cipher should be used for encryption. This is the default.
Specifies that the blowfish cipher should be used for encryption.
Specifies the TCP port number to be used for communicating with the SSH2 client. Default is
port 22.
Specifies a debug level. Default is 0.
Specifies a login name for the remote host.
Specifies the name of the remote host.
Specifies the IP address of the remote host.
Specifies the name of the remote file to be copied to the switch.
Specifies that the copied file is a switch configuration file. It the incremental option is not
specified, it replaces the current switch configuration.
Specifies that the copied file should be handled like an incremental configuration download
(only the commands in the file are executed).
Specifies that the copied file is an ExtremeWare image.
Specifies that the image should be placed in the primary image area.
Specifies that the image should be placed in the secondary image area.
Specifies that the copied file is a bootrom image.
and accesses the file
<user>
. You will be
<remote_file>
scp2
1021