Example
The following command clears all log messages, from the NVRAM:
clear log static
History
This command was first available in ExtremeWare 2.0.
The
diag-status
The
error-led
The
messages
This command was added to the Summit "e" series of switches in ExtremeWare 7.1e.
The
diag-status
Platform Availability
This command is available on all platforms.
ExtremeWare 7.5 Command Reference Guide
option was added in ExtremeWare 7.0.0.
option was added in ExtremeWare 7.1.0
option was added in ExtremeWare 7.1.0
and
options were added in ExtremeWare 7.2e.
messages
clear log
659