enable flow-redirect
enable flow-redirect [all | <flow redirect>]
Description
Enables flow redirection.
Syntax Description
all
flow redirect
Default
The default parameter is all.
Flow redirection is disabled by default.
Usage Guidelines
When you create a new flow redirection policy, flow redirection is automatically enabled.
To disable flow redirection, use the following command:
disable flow-redirect
Example
The following command enables flow redirection for all flow policies:
enable flow-redirect all
History
This command was available in ExtremeWare 6.1.4.
Platform Availability
This command is available on all "i" series platforms.
ExtremeWare 7.5 Command Reference Guide
Specifies all flow redirection policies.
Specifies a single flow redirection policy.
enable flow-redirect
605