Extreme Networks ExtremeWare Command Reference Manual page 1052

Security Commands
Egress Port:
Ingress Ports:
In Profile:
Rate Limit:
Out Profile:
The following example shows information for the rate limit configured on port 5:
#show rate-limit port 5
Rate-Limit "r1"
Access-mask:
MAC:
IP/mask:L4port: dest-ip=13.13.13.0/24:---- source-ip=none/--:----
Layer 2:
Layer 3/4:
Egress Port:
Ingress Ports:
In Profile:
Rate Limit:
Out Profile:
History
This command was first available in ExtremeWare 7.1e.
Platform Availability
This command is available on the "e" series platforms only.
1052
5
permit
10 Mbps
set code-point=0x2c
"f1"
5
permit
10 Mbps
set code-point=0x2c
ExtremeWare 7.5 Command Reference Guide