Enable Web Https Access-Profile - Extreme Networks ExtremeWare Command Reference Manual

Security Commands

enable web https access-profile

enable web https access-profile [none | <access-profile>] port <port
number>
Description
Allows HTTPS access on the specified (non-default) port.
NOTE
This command is available only for the Alpine 3800 and Summit 300 series switches.
Syntax Description
none Specifies to not to use an access profile when accessing HTTPS.
access-profile Specifies the name of an access profile to use when accessing HTTPS.
port number Specifies the port number to use to access HTTPS.
Default
N/A
Usage Guidelines
Use this command to set up an access profile for a particular port number to restrict HTTPS usage.
Example
The following example enables HTTPS access using the access-profile named secure_web on port 120:
enable web https access-profile secure_web port 120
History
This command was first available in ExtremeWare 6.2a.
This command was added to the Summit "e" series of switches in ExtremeWare 7.3e; it was added to
the "i" series of switches in ExtremeWare 7.3.0.
Platform Availability
This command is available on Summit 300 and Alpine 3800 series only.
1020 ExtremeWare 7.5 Command Reference Guide