Disable Slb - Extreme Networks ExtremeWare Command Reference Manual

Hide thumbs Also See for ExtremeWare:

Table of Contents

SLB Commands—"i" Series Switches Only

disable slb

Disables SLB processing.

Syntax Description

This command has no arguments or variables.

SLB is disabled by default.

Usage Guidelines

Disabling SLB causes the following to occur:

• Closes all connections.

• Withdraws virtual server routes or routes that do not respond with proxy ARP responses of virtual

server addresses.

• Disconnects the switch from redundant SLB switches.

To enable SLB, use the following command:

The following command disables SLB:

This command was first available in ExtremeWare 6.1.

Platform Availability

This command is available on all "i" series platforms.

ExtremeWare 7.5 Command Reference Guide

Extremeware 7.5