Disable Slb Node Ping-Check - Extreme Networks ExtremeWare Command Reference Manual

disable slb node ping-check

disable slb node [all | <ip address>] ping-check
Description
Disables layer 3 ping check.
Syntax Description
all
ip address
Default
Ping check is disabled by default.
Usage Guidelines
Ping check is automatically enabled when a node is added to a pool.
To enable ping check on a node, use the following command:
enable slb node ping-check
Example
The following command disables all ping checks:
disable slb node all ping-check
History
This command was first available in ExtremeWare 6.1.
Platform Availability
This command is available on all "i" series platforms.
ExtremeWare 7.5 Command Reference Guide
Specifies all nodes.
Specifies the IP address of the node.
disable slb node ping-check
595