Use Configuration - Extreme Networks ExtremeWare Command Reference Manual

use configuration

use configuration [primary | secondary]
Description
Configures the switch to use a previously saved configuration on the next reboot.
Syntax Description
primary
secondary
Default
N/A
Usage Guidelines
The keyword
Example
The following command specifies that the next reboot should use the primary saved configuration:
use configuration primary
History
This command was available in ExtremeWare 2.0.
Support for the
applicable to the Alpine and BlackDiamond chassis.
Support for the
This command was added to the Summit "e" series of switches in ExtremeWare 7.1e.
Support for the
Platform Availability
This command is available on all platforms.
ExtremeWare 7.5 Command Reference Guide
Specifies the primary saved configuration.
Specifies the secondary saved configuration.
can be abbreviated to
configuration
parameter was introduced in ExtremeWare 7.0.0. The
slot
keyword was introduced in ExtremeWare 7.1.0.
all
and keywords was removed in ExtremeWare 7.4.
slot all
.
config
<slot>
use configuration
parameter is
1121