Configure Fdb Agingtime - Extreme Networks ExtremeWare Command Reference Manual

FDB Commands

configure fdb agingtime

configure fdb agingtime <seconds>
Description
Configures the FDB aging time for dynamic entries.
Syntax Description
seconds Specifies the aging time in seconds. Range is 15 through 1,000,000. A value of 0 indicates that the
entry should never be aged out.
Default
300 seconds
Usage Guidelines
The range is 15 through 1,000,000 seconds.
If the aging time is set to zero, all aging entries in the database are defined as static, nonaging entries.
This means that they do not age out, but non-permanent static entries can be deleted if the switch is
reset.
Example
The following command sets the FDB aging time to 3,000 seconds:
configure fdb agingtime 3000
History
This command was available in ExtremeWare 2.0.
This command was added to the Summit "e" series of switches in ExtremeWare 7.1e.
Platform Availability
This command is available on all platforms.
406 ExtremeWare 7.5 Command Reference Guide