Unconfigure Transceiver-Test Window - Extreme Networks ExtremeWare Command Reference Manual

Hide thumbs Also See for ExtremeWare:

Table of Contents

unconfigure transceiver-test window

Returns the transceiver test window to the factory default of eight 20-second windows.

This command is available only on modular switches.

Syntax Description

The command has no arguments or variables.

Usage Guidelines

Use this feature when the switch can be brought off line.

This configuration provides a sliding window. When you return to the default window, the switch

checks for errors within the last eight 20-second windows.

Extreme Networks does not recommend changing the default transceiver test window. The default is

adequate for most networks.

The following command returns the transceiver test window to eight 20-second windows:

configure transceiver-test window

This command was first available in ExtremeWare 6.2.2b108.

This command was not supported in ExtremeWare 7.0.

This command is supported in ExtremeWare 7.1.0.

Platform Availability

This command is available only on modular switches.

ExtremeWare 7.5 Command Reference Guide

Extremeware 7.5