SLB Commands—"i" Series Switches Only
configure flow-redirect timer ping-check
configure flow-redirect timer ping-check frequency <seconds> timeout
<seconds>
Description
Configures the frequency and timeout for the flow redirection ping check.
Syntax Description
frequency
Specifies the ping check frequency. The range is 1 to 60.
timeout
Specifies the ping check timeout. The range is 1 to 60.
Default
The default frequency is 10 seconds.
The default timeout is 30 seconds.
Usage Guidelines
The frequency must be less than the timeout.
Example
The following command configures a flow redirection ping check frequency of 5 seconds and a timeout
of 15 seconds:
configure flow-redirect timer ping-check frequency 5 timeout 15
History
This command was first available in ExtremeWare 6.2.1.
Platform Availability
This command is available on all "i" series platforms.
504
ExtremeWare 7.5 Command Reference Guide