Configure Debug-Trace Ipxsap-Entry - Extreme Networks ExtremeWare Command Reference Manual

Troubleshooting Commands

configure debug-trace ipxsap-entry

configure debug-trace ipxsap-entry <debug level>
Description
This command is not currently supported.
NOTE
This command is available only on the "i" series switches.
Syntax Description
debug level Specifies a debug level:
0 — Not currently supported.
1 — Not currently supported.
2 — Not currently supported.
3 — Not currently supported.
4 — Not currently supported.
5 — Not currently supported.
Default
The default level is 0.
Usage Guidelines
This command is not currently supported.
Example
This command is not currently supported.
History
This command was first available in ExtremeWare 6.1.
Platform Availability
This command is available on"i" platforms only.
1156 ExtremeWare 7.5 Command Reference Guide