Use Image - Extreme Networks ExtremeWare Command Reference Manual

Configuration and Image Commands

use image

use image [primary | secondary]
Description
Configures the switch to use a saved image on the next reboot.
Syntax Description
primary Specifies the primary saved software image.
secondary Specifies the secondary saved software image.
Default
N/A
Usage Guidelines
If you issue the
unconfigure switch all
the command; it can be either a primary or secondary image.
use image
Example
The following command configures the switch to use the primary image on the next reboot:
use image primary
History
This command was first available in ExtremeWare 2.0.
Support for the parameter was introduced in ExtremeWare 7.0.0.
slot
This command was added to the Summit "e" series of switches in ExtremeWare 7.1e.
Platform Availability
This command is available on all platforms.
1122
command, you will still have the last configured value of
ExtremeWare 7.5 Command Reference Guide