Disable Temperature-Logging - Extreme Networks ExtremeWare Command Reference Manual

Commands for Status Monitoring and Statistics

disable temperature-logging

disable temperature-logging
Description
Stops recording the celsius system temperature to the syslog for the BlackDiamond and Alpine systems.
(The temperature is recorded in degrees celsius.)
NOTE
This command is available only on modular switches.
Syntax Description
This command has no arguments or variables.
Default
Disabled
Usage Guidelines
Use this command to stop recording the system temperature to the syslog.
If you have already enabled temperature logging, and you want to view the current temperature of the
system, do the following:
1 Disable the temperature logging feature using the following command:
disable temperature-logging
2 Re-enable the temperature logging feature using the following command:
enable temperature-logging
3 Display the syslog using the following command:
show log
Example
The following command stops recording the system temperature to the syslog:
disable temperature-logging
History
This command was first available in ExtremeWare 6.2.2b108.
This command was not supported in ExtremeWare 7.0.
This is supported and the command syntax changed from
ExtremeWare 7.1.0.
742
disable log temperature
in
ExtremeWare 7.5 Command Reference Guide