Configure Slb Global Pop3 - Extreme Networks ExtremeWare Command Reference Manual

SLB Commands—"i" Series Switches Only

configure slb global pop3

configure slb global pop3 user <user name> {password {encrypted}
<password>}
Description
Configures the default parameters for layer 7 POP3 service checking.
Syntax Description
user Specifies the user name that is checked.
password Specifies the password for the user name.
encrypted Encrypts the password stored in the configuration file.
Default
For both user and password, the default value is anonymous.
Usage Guidelines
If you do not enter a password, you are prompted for the password twice. Extreme Networks
recommends that you use a password.
The POP3 service check provides a more thorough check than ping check, because the POP3 service
check logs in to the service.
To enable service checking, use the following command:
enable slb vip service-check
To configure the frequency and timeout of service checks, use the following command:
configure slb global service-check
To configure the parameters for a specific virtual server, use the following command:
configure slb vip service-check ftp
Example
The following command configures the service check to log in using the user name "service" and the
password "check":
configure slb global pop3 user service password check
History
This command was first available in ExtremeWare 6.1.
Platform Availability
This command is available on all "i" series platforms.
522 ExtremeWare 7.5 Command Reference Guide