Configure Debug-Trace Isis-Spf - Extreme Networks ExtremeWare Command Reference Manual

Troubleshooting Commands

configure debug-trace isis-spf

configure debug-trace isis-spf <level>
Description
Controls logging of debug messages related to SPF Calculation.
NOTE
This command is available only on the "i" series switches.
Syntax Description
debug level Specifies a debug level. Following are the debug levels:
0 — Critical/Error Messages
1 — Warning Messages
2 — Concise Messages
3 — Verbose Messages
4 — Packet Dumps
Default
The default is 0.
Usage Guidelines
The range is 0 to 5. Higher levels record more verbose messages. Higher levels also record
debug level
the messages recorded at lower levels.
History
This command was first available in ExtremeWare v6.1.8 IS-IS tech release and subsequently
incorporated into ExtremeWare 7.0.0.
Platform Availability
This command is available on"i" platforms only.
1164 ExtremeWare 7.5 Command Reference Guide