Show Ports Sharing - Extreme Networks ExtremeWare Command Reference Manual

Commands for Configuring Slots and Ports on a Switch

show ports sharing

show ports <portlist> sharing
Description
Displays port loadsharing groups.
Syntax Description
portlist Specifies one or more ports or slots and ports. On a modular switch, can be a list of slots and ports. On
a stand-alone switch, can be one or more port numbers. May be in the form 1, 2, 3-5, 2:*, 2:5, 2:6-2:8.
Default
N/A
Usage Guidelines
None
Example
The following example shows all of the load sharing groups on the Summit 400:
* Summit400-48t:46 # show ports sharing
Load Sharing Monitor
Config Current
Master Master
==========================================================
37 37
Link Status: (A) Active, (D) Disabled, (LB) Loopback, (ND) Not Distributing
(NP) Not Present, (R) Ready
Ld Share Type: (a) address based
The next example shows dynamic load sharing configured on a Summit 300-24:
* Summit300-24:29 # show ports sharing
Load Sharing Monitor
Config Current
Master Master
==========================================================
1 1
Link Status: (A) Active, (D) Disabled, (LB) Loopback, (ND) Not Distributing
(NP) Not Present, (R) Ready
336
Ld Share Ld Share
Type Group
a 37
a 38
a 39
a 40
a 41
a 42
Ld Share Ld Share
Type Group
dy 1
dy 2
Link Link
Status Ups
A 1
R 0
A 1
A 1
A 1
A 1
Link Link
Status Ups
ND 1
D 0
ExtremeWare 7.5 Command Reference Guide