Show Snmpv3 Notify - Extreme Networks ExtremeWare Command Reference Manual

Commands for Managing the Switch

show snmpv3 notify

show snmpv3 notify {{hex <hex value>} <notify name>}
Description
Display the notifications that are set. This command displays the snmpNotifyTable.
Syntax Description
hex
param name
Default
N/A.
Usage Guidelines
Use this command to display entries from the SNMPv3 snmpNotifyTable. This table lists the notify tags
that the agent will use to send notifications (traps).
If no notify name is specified, all the entries are displayed.
Example
The following command displays the notify table entry for N1:
show snmpv3 notify N1
History
This command was first available in ExtremeWare 7.1.0.
This command was added to the Summit "e" series of switches in ExtremeWare 7.2e.
Platform Availability
This command is available on all platforms.
236
Specifies that the value to follow is to be supplied as a colon separated string
of hex octets.
Specifies the parameter name associated with the target.
ExtremeWare 7.5 Command Reference Guide