Security Commands
enable web
enable web
Description
Enables both HTTP access to the switch and HTTPS on the default ports.
NOTE
This command is available only on the Summit 300 series switches.
Syntax Description
This command has no parameters or variables.
Default
Enabled
Usage Guidelines
Use this command to enable HTTP and HTTPS access to the switch web pages on the default ports. The
default port for HTTP is port 80 and HTTPS is port 443.
Example
The following command enables HTTP and HTTPS on the default port:
enable web
History
This command was first available in ExtremeWare 6.2a.
This command was added to the Summit "e" series of switches in ExtremeWare 7.3e.
Platform Availability
This command is available only on Summit 300 series switches.
1016
ExtremeWare 7.5 Command Reference Guide