Extreme Networks ExtremeWare Command Reference Manual page 938

Hide thumbs Also See for ExtremeWare:

Table of Contents

Security Commands

Usage Guidelines

The access list is applied to all ingress packets.

The following command defines an access-list rule named allow10_23 with precedence 30 that permits

TCP port 23 traffic destined for other 10.x.x.x networks, and assigns QoS profile Qp4:

create access-list allow10_23 tcp dest 10.0.0.0/8 ip-port 23 source any ip-port any

permit qosprofile qp4 ports any precedence 30

This command was first available in ExtremeWare 6.0, and replaced the

configure ipqos

Platform Availability

This command is available on the "i" series platforms only.

ExtremeWare 7.5 Command Reference Guide

Extremeware 7.5