Unconfigure Ports Display String - Extreme Networks ExtremeWare Command Reference Manual

unconfigure ports display string

unconfigure ports <portlist> display-string
Description
Clears the user-defined display string from one or more ports.
Syntax Description
portlist Specifies one or more ports or slots and ports. On a modular switch, can be a list of slots and ports.
On a stand-alone switch, can be one or more port numbers. May be in the form 1, 2, 3-5, 2:*, 2:5,
2:6-2:8.
Default
N/A
Usage Guidelines
This command removes the display string that you configured using the
display-string
On a modular switch,
can be one or more port numbers. For a detailed explanation of port specification, see "Modular Switch
Numerical Ranges" or "Stand-alone Switch Numerical Ranges" in Chapter 1.
Example
The following command clears the user-defined display from port 4 on a stand-alone switch:
unconfigure ports 4 display-string
The following command clears the user-defined display string from slot 2, port 4 on a modular switch:
unconfigure ports 2:4 display-string
History
This command was first available in ExtremeWare 4.0.
This command was added to the Summit "e" series of switches in ExtremeWare 7.1e.
Platform Availability
This command is available on all platforms.
ExtremeWare 7.5 Command Reference Guide
command.
can be a list of slots and ports. On a stand-alone switch,
<portlist>
unconfigure ports display string
configure ports
<portlist>
355